If the surface of the spreader roll has to be cleaned, no aggressive solution or sharp tools should be used which could damage the rubber sleeve. In case of any doubt, please contact Stowe Woodward.

Rubber sleeves
Rubber sleeves can be polished with fine coated abrasives when the roll is turning, but not when the roll is stopped.

If water is used to clean the surface of the roll, please ensure that water jets do not impinge directly on the end seals. This is to prevent the grease in the labyrinth seals from being washed out.

PTFE sleeves
Sharp tools should not be used if the roll is covered with a PTFE sleeve.

They can be cleaned with water, kerosene or petroleum.

It should be observed that no abrasive media or mechanical parts should touch the roll. High temperatures or welding work in the immediate vicinity must be avoided.